- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
Synthetic blood penetration tester for medical mask
Medical mask synthetic blood penetration tester is used for synthetic blood penetration test of medical mask, it can output test report and save test data.
TEST STANDARDS
Meet the test standard YY0469-2011 .
FEATURES
1. The equipment is equipped with an air pump to adjust the air pressure.
2. The detector is equipped with a positive pressure sensor for collecting test data pressure.
3. The pressure has stepless adjustable function, and the technical parameters such as holding pressure and holding time can be set.
SPECIFICATIONS:
1. Blood 2ml test.
2. Control mode: manual control.
3. Pressure 20kpa, accuracy 0.1kpa.
Test process: Fix the sample on the sample holder of the instrument, spray 2ml of synthetic blood with a surface tension of 0.042 ± 0002n / m at a distance of 30.5cm from the center of the sample. Then spray it at a pressure of 16kpa from the needle tube with an inner diameter of 0.84mm in the horizontal direction The target area of the sample. Take off , check the result within 10s.
