- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
QG-4A metallographic sample cutting machine
The machine is suitable for cutting general irregular metallurgical sample materials, such as cylinder、polygon materials ect., in order to observe the material microstructure, petrographic organization. This machine adopted by double cover fully enclosed structure. It guarantees to cutting samples under absolute security condition. he equipped cooling system can clear up the heat produced during cutting so that it will avoid the metallographic or lithofacies structure deforming of specimen because of heating influence, while increasing the cutting section and improving the utilization of cutting grinding wheel. It is the necessary specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
2. Main specifications:
| Model | QG-4A |
| Max cutting section | 65mm |
| Grinding wheel | 250X1.5X32mm |
| Motor | 1.5kw |
| Rotating speed | 2800r/min |
| power supply | 380V,50Hz |
| Dimension |
990X670X1320mm |
