IEC-60794-1 Method E1, EN 187000 method 501, EIA/TIA-455 No. 33
Optical Fiber Cable Crush Cut Tester complies with employs an IEC-60794-1-2 Method E3/E12 to perform
compression (Crush) test on optical cables.
Cable is laid to rest under compression as per detailed specifications, and then the attenuation of fiber optics is measured.
It employs servo-controlled system to apply compressive force on the cable in constant speed and
maintains the compression force in specified period.
The plate is mounted on the bottom of moveable crosshead which allows a sample of cable to be crushed
between a flat steel base plate and movable steel plate which applies the crushing force uniformly over the
Technical Parameters |
|
Model |
HST GQC-5 |
Crush Load capacity |
5KN |
Crosshead travel |
200 mm |
Loading speed |
0.01 – 500 mm/min |
Displacement measuring accuracy |
±0.3% |
Position measurement accuracy |
±0.01% of reading or 0.0001 mm, whichever is greater |
|