- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
HST-DIT1800E Ejection Impact Testing Machine
Application
The ejection drop weight impact testing machine is mainly a testing equipment for testing the impact resistance of various metal and non-metal pipes and plates (including various non-metal materials such as plastics, ceramics, nylon, building materials, etc.). The impact force value sensor and test system are used, and the high-speed data acquisition card uses the oscilloscope impact sensor to measure the load and deformation transient values during the fracture process of the impacted sample, that is, the impact absorbed energy, the force-displacement-energy curve and the curve during the impact process.
Standards
ASTM D 7136/D 7136M-05,ASTM D 3763-02,ASTM E 23-07a
Specifications
Model
HST DIT 1800E
Impact energy
6～1800J
Impact speed
1.6～20m/s
impact height
0.1～1.2m(Simulation up to 20m)
maximum impact speed
7m/s～20m/s（70kg～3kg）
Hammer lifting speed
1m/min～3m/min Continuous adjustable
Hammer head positioning accuracy
1mm
Maximum load of impact force sensor
100kN
Impact force value sensor static linear error
Full range ±1%（10%～50%FS）
Point by point ±2%（50%～100%FS）
A/D sampling resolution
16bits
Maximum sampling frequency
2MHz
Frequency response
500kHz
Channel storage capacity
60000
Experimental dynamic error
<2%
Test area space
720mm×660mm×580mm
Testing machine dimensions
920×860mm×3300mm
Testing machine net weight
1200kg
power supply
220V±10%，50Hz±10%，3kw
