Application:
This series is widely used for Izod and Charpy impact test on plastics and plastic pipes. Equipped with tensile impact pendulum and fixtures, it can carry on tests on plastic film and sheet.
Standards
ISO 179, ISO 180, ISO 8256, ISO 9854.1, ASTM D256, ASTM D1822,ASTM D6110
Specifications
Type
Charpy
Izod
Maximum impact energy
To be confirmed according to the Pendulum
22J
Impact energy (ISO, GB)
4J、
7.5J,15J,25J,50J
5.5J,11J,22J
Impact Energy (ASTM)
-
5.4J、10.8J、21.6J
Impact velocity
2.9m/s
3.8 m/s(ISO、GB)
3.5 m/s(ISO、GB)
3.46m/s(ASTM)
The distance from the center of the pendulum axis to the center of the specimen
395mm(ISO、GB)
335mm
Radius of blade fillet
R=2mm
R=0.8mm
Blade Angle
30º
75º
Pendulum prelift Angle
95.5°
150°
150°(ISO、GB)、145.2°(ASTM)
Support fillet radius
R=1mm
R=0.2
Front Angle of support
5 º
--------
Back Angle of support
10 º
--------
Support span
40mm、60mm、62mm、70mm
--------
Sample type and size (length × width × thickness) mm3
ISO179-2000
ISO180-2000、
Type 1 sample:80×10×4
GB/T 1843-1996:
GB/T 1043-2008:
Type 1 sample:80×10×4
Type 1 sample:80×10×4
Type 2 sample 63.5×12.7×12.7
Type 2 sample:50×6×4
Type 3 sample:63.5×12.7×6.4
Type 3 sample:120×15×10
Type 4 sample:63.5×12.7×3.2
Low temperature environment
Room temperature~ - 70℃
Angular resolution
0.045°
Energy resolution
Better than 1/2375FS
Power source
AC 220V 50Hz