- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HEZ-15/20mm Metal Wire Torsion Testing Machine
Application:
HEZ Series Metal Wire Torsion Tester is mainly used to test the plasticity of metal wires and ropes undertorsion condition. Surface flaws of steel wires may be shown during the testing process. It is most suitable forquality inspection of departments related to steel wire.
It conforms to standards of ASTM A938, ISO7800.
Specifications:
|
Model |
HEZ-14 |
HEZ-20 |
|
Work Method |
Auto-loading |
|
|
Max. Clamp metal wire diameter （mm） |
10.0-14.0 |
14.0-20.0 |
|
Parallelism of the full moving guide |
≤0.2 |
|
|
Distance between the grips (mm) |
500 |
500 |
|
Rotation speed adjusting range (r/min） |
15,30,60r/min |
|
|
Torsion speed error (%) |
＜±10% |
|
|
Min. number of circle values |
0.1 |
|
|
Two chuck alignment（mm) |
＜Ф0.4 |
|
|
Jaw hardness（HRC) |
50-65 |
|
|
Weights error (%) |
±0.5 |
|
|
Work Noise （dB) |
≤70 |
|
|
Min. revolutions reading values（r） |
1 |
|
|
Power Supply |
AC 220V±10%,50Hz |
|
Recommended products
