- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
M-2 Metallographic Specimen Pre Grinding and Polishing Machine
1. Application and Feature of Grinding-Polishing Machine
Model M-2 Metallographic specimen pre-grinding machine is a kind of wet type pre-grinding machine. Taking advantage of various water-resistant sand papers with different granularity, it can be used to pre-grind various metal and alloy materials. By using this machine, manual grinding can be replaced by mechanical grinding so as to improve specimen preparing efficiency, also the deforming and heating traces produced during cutting can be removed completely. This will be suitable to observe and measure the metallographic structure of specimen under microscope.
2. Main Specifications:
| Model | M-2 |
| Grinding/Polishing Disc Diameter | 203mm |
| Grinding Disc Rotating Speed | 450 rpm（can be ordered） |
| Motor | YC7124 370 W |
| Dimension | 700×600×278mm |
| Weight | 45kg |
| Operating voltage | AC 220V,50Hz |
