Abstract
The HST WPD-2500G is a benchtop electronic Fatigue Testing Machine: five stations, 2500N, servo electric cylinder drive, for the compression fatigue test of very small samples. Three stations test at room temperature, two stations are equipped with high-temperature boxes for testing at high temperature, and every station runs on its own independent touchscreen. It is built for laboratory R&D and material pressure testing.
Key Takeaways
- Five stations on one benchtop, each with its own independent touchscreen.
- 2500N compression fatigue test for very small samples, driven by a servo electric cylinder.
- Three stations at room temperature; two stations with high-temperature boxes for high-temperature testing.
- Suited to laboratory R&D and material pressure testing.
Five stations, two temperatures
The bench splits a small-sample fatigue program into its two temperature conditions:
- Three stations run the compression fatigue test at room temperature.
- Two stations are equipped with high-temperature boxes, so the same test runs at high temperature inside the box.
- Each station is set up and watched one by one on its own independent touchscreen, and the room-temperature and high-temperature runs share one bench.
In the HST line, the WPD-2500G is one of the servo-electric fatigue test machines.
How the servo electric cylinder does the work
- Every station is driven by a servo electric cylinder at 2500N, so the machine is electronic, with no hydraulic skid on the bench.
- The test is the compression fatigue of very small samples: the specimens take the cyclic compression load the servo electric cylinder applies.
- The provided information lists the drive, the load and the station layout; cycle frequency, stroke and waveform are not given, so they are not stated here.
HST WPD-2500G specifications
- Model: HST WPD-2500G
- Load: 2500N
- Stations: 5, each with an independent touchscreen
- Temperature split: 3 stations at room temperature, 2 stations with high-temperature boxes for high-temperature testing
- Drive: servo electric cylinder
- Form factor: benchtop electronic fatigue testing machine
- Test: compression fatigue of very small samples
- Applications: laboratory R&D, material pressure testing and similar work
Selection guide: where the WPD-2500G fits
- Your specimens are very small and your program is compression fatigue - the 2500N benchtop machine is sized for that corner of the lab.
- Your program mixes room-temperature and high-temperature runs - the three plus two station layout carries both conditions on one bench.
- In the HST catalog, the WPD-2500G sits on the Dynamic Fatigue Test System page, the five-station benchtop member of the fatigue family.
Total cost of ownership
- The five stations sit on the lab bench as one benchtop unit, so one shared footprint carries a program that otherwise spans two temperature setups.
- The provided information does not list power, dimensions or weight, so no figures are claimed here.
Standards and compliance
- The information provided for this model does not list test standards or certification, so no standard or certification claims are made here.
Frequently Asked Questions (FAQ)
1. What is the HST WPD-2500G?
A five-station, 2500N benchtop electronic fatigue testing machine for the compression fatigue test of very small samples.
2. How are the five stations split by temperature?
Three stations test at room temperature; two stations are equipped with high-temperature boxes for high-temperature testing.
3. How is each station controlled?
Each station runs on its own independent touchscreen.
4. What drive does it use?
A servo electric cylinder at 2500N on every station.
5. Where is it used?
Laboratory R&D, material pressure testing and similar work.
HST GROUP – Focus on Material Test. Kindly contact HST Group via WhatsApp at +86 15910081986.
