Abstract
The HST HGW series is a dual space, computer controlled pipe ring stiffness tester in five load ranges - HGW-20E, HGW-50E, HGW-100E, HGW-200E and HGW-300E from 20 kN to 300 kN. It determines the ring stiffness, ring softness and compression of thermoplastic pipes with circular cross-section, and conforms to the requirements of all kinds of plastic pipes such as structured-wall pipes, PE corrugated pipes and helically wound pipes. The pipe diameter range is customized from 110 mm to 3000 mm, and it meets ISO 9969, ISO 5893, ASTM D638, ASTM D790, ISO 37 and ISO 6892.
Key Takeaways
- Five load ranges in one frame family: HGW-20E, HGW-50E, HGW-100E, HGW-200E and HGW-300E, from 20 kN to 300 kN maximum load.
- Determines ring stiffness, ring softness and compression of circular cross-section thermoplastic pipes.
- Three closed loop control (stress, strain, displacement), AC servo drive (Taiwan DELTA) with Japan BEITTO reducer, displacement resolution 0.04 um.
- Pipe diameter customized from 110 mm to 3000 mm; effective testing width 450 mm and compression testing space 700 mm, both custom per pipe diameter.
- Loads calibrated to Class 0.5 according to ISO 7500-1, meets ASTM E4; meets ISO 9969, ISO 5893, ASTM D638, ASTM D790, ISO 37 and ISO 6892.
What the HST HGW series is for
The HGW series (dual space) Pipe Ring Stiffness Testing Machine is mainly used to determine three properties of thermoplastic pipes with circular cross-section:
- Ring stiffness: the property that defines how well a buried pipe holds its shape under external pressure.
- Ring softness: the complementary flexibility measure for the same pipe family.
- Compression: the compression behavior of the pipe section.
It conforms to the requirements of all kinds of plastic pipes, such as structured-wall pipes, PE corrugated pipes and helically wound pipes. In the HST catalog, the series sits on the pipe ring stiffness testing machine page inside the plastic pipes and rubber test machine family.
How a ring stiffness run is driven
- The dual space layout carries a tensile space and a compression test space, and the position limit switch with upper and lower lights bounds the travel.
- The drive is all electric: an AC servo control system (Taiwan DELTA) through a Japan BEITTO reducer gear, with three closed loop control of stress, strain and displacement.
- A special deformation measuring device for ring stiffness reads the pipe deflection while the USA load cell records the force.
- The compression test fixture is configured according to the pipe diameter, so the same frame family serves the full customized diameter range with the right setup.
Five load ranges, one frame family
- The family spans 20 kN to 300 kN in five steps - HGW-20E, HGW-50E, HGW-100E, HGW-200E and HGW-300E - so a pipe program that starts light and grows heavy can stay on one frame type.
- Test speed runs 0.001 to 1000 mm/min on the HGW-20E and HGW-50E, and 0.001 to 500 mm/min on the HGW-100E, HGW-200E and HGW-300E; the crosshead holds ±0.5% of set speed.
- The pipe diameter range is customized from 110 mm to 3000 mm, the effective testing width is 450 mm and the compression testing space is 700 mm - both custom per pipe diameter. Extra wide and extra height frames are available.
- The tensile space, test width and speed are completely customizable, and the power supply system is completely customizable as well.
HST HGW series specifications
- Models and maximum load: HGW-20E 20 kN, HGW-50E 50 kN, HGW-100E 100 kN, HGW-200E 200 kN, HGW-300E 300 kN
- Calibration standard: Class 0.5 according to ISO 7500-1, meets ASTM E4
- Testing load accuracy: ±0.5%
- Load range: 0.4% to 100% F.S
- Load resolution: 1/500,000 FS
- Test control mode: three closed loop control - stress, strain and displacement
- Displacement accuracy: within ±0.5% of the value
- Deformation accuracy: ≤±0.5% of 0.4% to 100% of rated capacity
- Displacement resolution: 0.04 um
- Test speed: 0.001 to 1000 mm/min (HGW-20E, HGW-50E); 0.001 to 500 mm/min (HGW-100E, HGW-200E, HGW-300E)
- Crosshead speed: ±0.5% of set speed
- Pipe diameter range: customized (110 mm to 3000 mm)
- Effective testing width: 450 mm (according to pipe diameter, custom)
- Compression testing space: 700 mm (according to pipe diameter, custom)
- Position limit switch: upper and lower lights
- Power supply: AC 220 V ±10%, 50 Hz/60 Hz
- Standard configuration: HST 4 columns main frame, AC servo control system (Taiwan DELTA), reducer gear (Japan BEITTO), compression test fixture per pipe diameter, special deformation measuring device for ring stiffness, USA Load Cell, control system by USB to computer, English operation software (other languages optional), handheld unit controller with 320 x 240 LED display, HP computer and printer
Selection guide: which model for which pipe program
- Pick the load range from the pipe program itself: the family covers the five-step load range, and the compression test fixture, effective testing width and compression testing space are configured according to the pipe diameter.
- If the diameter program reaches the top of the range, or needs extra wide or extra height frames, ask for the customized build - the tensile space, test width and speed are completely customizable, and the power supply system is completely customizable.
- For a dedicated single-purpose unit around the same duty, the Plastic Pipes Ring Stiffness Tester is the neighboring station in the HST range.
The software and the report it leaves behind
- Full digital control: the measuring and control system uses a special controller with digital adjustment of zero point and gain for load, deformation and displacement.
- Storage, setting and loading of various parameters, so multiple transducers connect to one load frame.
- Close-loop control with the reference curve shown while the operator adjusts the close-loop parameters, so the close-loop effect is visible during tuning.
- Graphic functions for reappearance, amplification, reduction, self-adaptation and lapping of curves, display and print at the appointed range, and observation of the test point coordinate.
- Multi controlling channels: displacement, force, deformation, stress, strain, constant stress, constant strain and more; deep-seated parameters sit in the Debug Toolbox.
- Multilevel identity management, text file data storage for easy inquiry, and multi-language support (English standard, Chinese and self-translatable to the native language).
- The test standard library covers GB, ASTM, DIN, JIS, BS and other testing standard specifications; the report outputs to Excel, Word or a template test report, editable to show the test person, test standard, test curve and test max load, with your company LOGO and name added.
Total cost of ownership
- The power supply is AC 220 V ±10% at 50 Hz/60 Hz, so the machine serves both frequency systems without conversion for export lines.
- The drive is all electric - the standard configuration list carries no hydraulic unit - which keeps the operating side simple day to day.
- The software, handheld unit controller, computer and printer are all standard, so the station is operational as delivered.
- Reports to Excel, Word or a custom template keep the paperwork in the tools the lab already uses.
Standards and compliance
Test methods the machine meets, per the product sheet:
- ISO 9969 - thermoplastic pipes, determination of ring stiffness
- ISO 5893 - thermoplastic pipes, determination of ring flexibility
- ASTM D638 - tensile testing of plastics
- ASTM D790 - flexural properties of plastics
- ISO 37 - vulcanized rubber, tensile test
- ISO 6892 - tensile testing of metallic materials
Calibration and measurement class, per the product sheet:
- Class 0.5 according to ISO 7500-1, meets ASTM E4 (load measurement)
- USA load cell: calibration within 0.5% accuracy as per ASTM E4, ISO 7500-1, EN 10002-2, BS 1610 and DIN 51221
- EN 10002-4 listed in the sheet's standard set (strain measurement)
Frequently Asked Questions (FAQ)
1. What does the HGW series measure?
The ring stiffness, ring softness and compression of thermoplastic pipes with circular cross-section - structured-wall pipes, PE corrugated pipes, helically wound pipes and other kinds of plastic pipes.
2. Which load ranges are available?
Five: HGW-20E, HGW-50E, HGW-100E, HGW-200E and HGW-300E, with maximum loads of 20, 50, 100, 200 and 300 kN.
3. Which pipe diameters can it test?
The pipe diameter range is customized from 110 mm to 3000 mm; the effective testing width and compression testing space are configured according to the pipe diameter.
4. How is the run controlled and displayed?
Three closed loop control through a USB connection to the computer, English operation software (other languages optional), and a handheld unit controller with a 320 x 240 LED display showing load, displacement and speed, with test start, test stop and test zero clearing.
HST GROUP – Focus on Material Test. Kindly contact HST Group via WhatsApp at +86 15910081986.
