- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
HST-BT40E/50E Electric Steel Bar Bending Testing Machine
HST-BT40E/50E Electric Steel Bar Bending Testing Machine
Application:
The Bending Testing Machine is special equipment to do bending test for reinforce bar, steel bar and pipe. Itcan do bending test in both directions according to standards requirement. It conforms to standards ASTM A615-89, ASTM A615M-89, ISO 7438:1985, and ISO8491:1986 (E).
Specifications:
| Model | HSTGW-E40 | HSTGW-E50 |
| Bending Diam Of Steel Bar | Ф6-Ф40mm | Ф6-Ф50mm |
| Forward Bending Angle | 0°～180° (the angle can be set freely in the range)l | |
| Reverse Bending Angle | 0°～25° (the angle can be set freely in the range) | |
| Roating Speed Of Working Table(r/min) | ＜3.7 | ＜3.0 |
| Diameter Of The Working Table | Ф580mm | Ф860mm |
| Motor Power | 1.5kw | 3kw |
