- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
GOST 7912-74 Rubber Plastic Cables Low Temperature Brittleness Tester
Rubber low temperature brittleness tester is to determine the maximum temperature under the impact of the rubber specimen, that is brittle temperature, also for performance comparation of non-hard plastic and other elastic materials in the low temperature conditions. Can also be measured to test the brittle temperature and low temperature performance in different rubber materials or different formulations of vulcanized rubber. In line with ISO 812 ISO 974 ASTM D2137, GB / T 1682-82, GB / T 15256-94 test method.
Technical parameters:
- Test temperature: -60℃—0℃
- Impact speed: 2m/s±0.2m/s
- After constant temperature, the temperature fluctuation within 3 minutes of the test: <±0.5℃
- Distance from impactor center to lower end of gripper: 11±0.5mm (rubber) 3.6±0.1mm (plastic)
- Dimensions: 720×700×1300mm
- Power: 1100w
- Cold well volume: 700ml
- Power supply: three-phase
