- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Impact Testing Machine Series
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
-
Universal Testing Machine
Horizontal Wire Rope Sling Tensile Strength Test Equipment
Horizontal Tensile Testing Machine is suitable for tensile test of long materials like wire rope, cable, nylon rope and chain etc. It applies the full digital controller, servo control system along with the standard analytic software, so it can realize close loop control for load and displacement, digitally setting zero, software/hardware digitally calibrating, protection, limit-position signal input, thus the machine posses user’ programming function. In addition the machine can be equipped with special analytic software and print the report templet according to the requirements from the customers. It’s widely used in some plants who produce longer materials.
Standard:
Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221. Strain measurement meets the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4
Technical:
| Model | WAL-500 | WAL-1000 | WAL-2000 | WAL-5000 | WAL-10000 | WAL-15000 |
| Max. testing load(kN) | 500 | 1000 | 1000 | 5000 | 10000 | 15000 |
| Amplifying multiple | 1,2,5 (Three steps) | |||||
| Accuracy of specimen elongation | 1%FS | |||||
| Resolution Of crosshead displacement (mm) | 0.02 | |||||
|
Tensile testing space （mm) |
500 | 500 | 500 | 500 | 1000 | 2000 |
| 1000 | 1000 | 1000 | 1000 | 3000 | 5000 | |
| 2000 | 3000 | 3000 | 3000 | 5000 | 8000 | |
