- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HST-9100 Optical Emission Spectrometers
HST-9100 is Full Range of Solutions for the Entire Metals Industry. It use full-digital technology to replace bulky photomultiplier tube (PMT) simulation technology and keep pace with international spectrometer technology. The adoption of vacuum optical chamber design, full-digital excitation light source, advanced CCD detectors, and high-speed data readout system equips the device with high properties, ultra-low limit of detection (LOD), long-term stability and repeatability. The analytical precision can meet the requirements of laboratory standard, the analytical date is stable and reliable. Widely used in Metallurgy, casting, machinery processing and other industries incoming and outgoing product quality control.
Technical Data
Item
Index
Optical System
Focal Length
400mm
Wavelength range
130nm-800nm
Detector
High resolution CCD Multi detectors
Degree of vacuum
Auto control within 6-20 pa
Pixel resolution
30pm
Grating line
2400m1/mm
First order spectral line dispersion rare
1.2nm/mm
Average resolution ratio
10pm/pixel
Full spectrum
Light room temperature is controlled automatically
Spark Source
Type
Digital arc and spark source
Spark frequency
100- 1000HZ
Discharge current
1-400A
Ignition voltage
>15000V
Excitation light
Optimization of discharge parameters design
High energy precombustion technology HEPS
Processor
High-speed data synchronization acquisition and processing
Spark Stand
Electrode
Tungsten electrode technology
Make up
Thermal deformation self-compensation design
Argon flushed with minimal consumption of Argon
Spray discharge electrode technology
Adjustable electrode technology
Measurable elements
Fe、Al、Cu、Ni、Ti、Co、Zn、Sn、Mg、Pb etc
Others
Dimension
800mm( L)*700mm*470mm(H)
weight
About 100kg
Storage temperature
0C-45C
Operating temperature
10C-35C, 23± 2C is recommended
Power
AC220V/50Hz(Customized)
Power consumption
Excitation:700W/Stand by:100W
Argon quality
99.999%, Argon pressure>4Mpa
Argon consumption
5L/min during spark mode
Interface
Ethernet data transmission based on
DM9000A
