- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Testing machine accessories
HST-RMD300 Rubber No Rotor Rheometer
1.Applicable Industry:
It is suitable for testing the variation of shear modulus when raw rubber is vulcanized. The shear modulus is proportional to the crosslinking density. So the results reflect the changes in the degree of crosslinking during vulcanization. So that we can measure the parameters like curing speed, Curing time and desulfurization.2.Meet standard:
GB/T16584— use rotorless curemeter to test vulcanization characteristics
ISO6502 Vulcanizing machine standard data
ASTMD5289 Rubber properties test methods
3.Technical Parameters:
|
MODEL |
HST-RMD300 |
|
Temperature range |
RT~200℃ |
|
Minimum temperature display |
0.1℃ |
|
Temperature fluctuation range |
±0.15℃ |
|
Heating rate |
About 15℃/min |
|
Torque range |
0-20mm |
|
Torque minimum reading |
0.001nm |
|
Swing angle |
±0.5°/ ±1°/ ±3°(optional) |
|
Swing speed |
100r/min(1.66HZ) |
|
Torque accuracy |
0.3% |
|
Temperature display resolution |
0.01℃ |
|
Temperature recovery time |
< 1.5min |
|
Temperature unit |
C (degrees Celsius), F (Fahrenheit), K (Kelvin) |
|
Acquisition rate |
200time/s |
|
Software language |
English, Chinese Simplified, Chinese Traditional |
|
Software connection |
USB2.0 |
|
Power |
1 phase 220V±15V 50HZ |
|
Dimensions |
600×600×1180㎜ |
|
Weight |
230㎏ |
