Abstract
The selection of the ideal metal wire reverse bend testing machine depends heavily on your specimen diameter, bending requirements, compliance standards, and long term operational stability. This 2026 buyer’s guide focuses on the HST JWJ-10 metal wire reverse bend testing machine, analyzing its structure, technical parameters, standard configuration, applicable standards and reliable support system to help metal processing factories, wire production enterprises and quality inspection institutions choose a high value metal wire bending test solution.
Key Takeaways
· The metal wire reverse bend testing machine is matched according to specimen diameter, bending angle, test frequency and applicable standards.
· HST JWJ-10 adopts touch screen control and automatic counting, stable and efficient for metal wire repeated bending test.
· Focus on total cost of ownership, not just upfront price: including maintenance, consumables and after sales support.
· Complete standard fixture configuration covers full range of 1–10 mm wire diameter, no extra purchase needed.
· Automatic shutdown after specimen break, auto reset and auto count greatly improve test efficiency and data accuracy.
· Fully compliant with ISO 7801, GB 238, DIN 51211, NF A03 010, GOST 1579 and other mainstream standards.
Understanding Metal Wire Reverse Bend Testing Machine Ecosystem
The metal wire reverse bend testing machine is mainly composed of a high strength host mechanical system and an intelligent electrical control system. HST JWJ-10 is an integrated high performance solution, not just a single component. It combines two stage reducer drive, photoelectric counting detection, touch screen operation and full range fixtures to ensure stable, accurate and repeatable bending test results.
HST JWJ-10: High Value Champion in Metal Wire Reverse Bend Testing Machines
In quality control of metal wire, wire rope, profile wire and thin sheet materials, a stable, easy to operate reverse bend testing machine is critical to verify plastic deformation resistance and internal defects. Developed and produced by HST GROUP (Jinan Hensgrand Instrument Co., Ltd.), a professional provider of material testing solutions with years of industry experience, the HST JWJ-10 sets a new benchmark for metal wire repeated reverse bending test equipment.
Application & Materials
· Metal materials: various metal wires, profile wires, steel wires, copper wires, aluminum wires
· Sheet materials: thin metal sheets (with sheet clamping device)
· Test items: repeated reverse bending test, bending fatigue performance test, defect detection
· Applicable scenarios: production quality inspection, incoming inspection, laboratory test, project acceptance
Fully compliant with global and domestic test standards:ISO 7801, GB 238, NF A03 010, DIN 51211, GOST 1579
Mechanical Structure & Stability Advantage
· Host mechanical system + electrical measurement & control system integrated design
· Two stage reducer drive for stable and uniform bending torque
· Photoelectric switch detection for accurate bending count
· Automatic shutdown when specimen breaks
· Automatic pendulum reset after test completion
· High strength structure, stable running, low noise
· Compact layout, small footprint, suitable for factory and laboratory use
This robust structure ensures stable performance even under long hour continuous testing, minimizing deviation and ensuring reliable test data.
High Precision Technical Specifications
|
Parameter |
Value |
|
Model |
HST JWJ-10 |
|
Display mode |
Touch screen display, automatic count |
|
Specimen diameter |
1–10 mm |
|
Specimen length |
150–200 mm |
|
Bend angle |
±90° |
|
Bend frequency |
<60 rpm |
|
Bend times |
Max 999999 |
|
Motor power |
220 V, 50 Hz, 1.5 kW |
|
Dimensions |
600 × 500 × 1200 mm |
|
Weight |
230 kg |
Complete Standard Configuration
1. Steel wire reverse bend testing machine mainframe: 1 set
2. Grips (Φ1–1.5, Φ1.5–2, Φ2–3, Φ3–4, Φ4–6, Φ6–8, Φ8–10 mm): one pair each
3. Tool kits: 1 set
4. Video tutorial for installation and operation: 1 set
Intelligent Operation & Advantages
· Touch screen operation, clear interface, easy to learn
· Automatic bending count, real time display
· Auto stop when specimen breaks, improves test safety
· Auto pendulum reset, reduces manual operation
· Wide diameter range from 1 mm to 10 mm, one machine for multiple uses
· Can do sheet metal bending test after installing sheet clamping device
· Stable drive system, long service life, low failure rate
The complete test flow — install specimen → set parameters → start test → auto stop → view data — simplifies operation and improves efficiency for both new and experienced users.
Beyond the Product: Critical Buying Factors (2026)
After Sales Support
· Professional online after sales & remote guidance for installation, operation and maintenance
· Independent factory design and production, reliable quality
· Video tutorial provided for quick start up
Total Cost of Ownership
· Low maintenance cost and long service life
· Standard configuration includes full range grips, reduces later procurement cost
· Stable structure and electrical system, low energy consumption
· High durability, reduces replacement and repair cost
Certification & Standards
· Comply with ISO 7801, GB 238, DIN 51211, NF A03 010, GOST 1579
· Suitable for factory inspection, third party testing and official acceptance
Model Matching & Application Expansion
HST JWJ-10 is positioned as a general purpose metal wire reverse bend testing machine, which covers most conventional metal wire diameter specifications. For special wire materials or larger diameter requirements, customized fixtures can be provided to meet diversified test needs.
Making a Decision That Lasts
The HST JWJ-10 metal wire reverse bend testing machine is not only a piece of test equipment, but also a long term partner for your material quality control. It balances performance, stability, configuration and cost, making it the best choice for metal wire repeated bending test in 2026.
Whether for daily production inspection, incoming material testing or laboratory material research, the HST JWJ-10 can provide professional, stable and efficient reverse bending test solutions.
Frequently Asked Questions (FAQ)
1. Why choose the HST JWJ-10 Bending Testing Machine?
It adopts touch screen control, automatic counting and automatic shutdown function, with full range standard grips covering 1–10 mm wire diameter. It runs stably, meets multiple international standards and offers high cost performance.
2. What materials can the HST JWJ-10 test?
It is mainly used for repeated reverse bending test of various metal wires. It can also carry out sheet metal bending test when equipped with a sheet clamping device.
3. What is the applicable specimen diameter?
The machine supports specimen diameter from1 mm to 10 mm, with matching standard fixtures for each segment.
4. Does it stop automatically when the sample breaks?
Yes. The machine uses photoelectric detection; it will stop automatically, reset the pendulum and keep the count value when the specimen breaks.
5. Can it meet official standard test requirements?
Yes. It fully complies withISO 7801, GB 238 and other mainstream standards, and can be used for formal quality inspection and acceptance.
6. Do you provide operation guidance?
Yes. We provide completevideo installation and operation tutorial and online remote guidance to help you get started quickly.
HST GROUP – Focus on Material Test. For more details, please contact us via WhatsApp: +86 1591008186
