- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Impact Testing Machine Series
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
-
Universal Testing Machine
GW-BT40H/50H Hydraulic Bending And Re-bending Testing Machine
Hydraulic Bending And Re-bending Testing Machine is a special equipment to carry on bending test for reinforce bar, steel bar and pipe.
It can do bending test with both directions according to standards requirement.
It conforms to standards ASTM A615-89, ASTM A615M-89, ISO 7438:1985, ISO8491:1986(E).
Specifications:
|
Model |
GW-BT40H |
GW-BT50H |
|
Diameter Range Of Bars & Pipes |
6~Ф40mm |
Φ6~Φ50mm |
|
Bending Angle |
0°~180° (the angle can be set freely in the range) |
|
|
Reverse Bending Angle |
0°～90°(the angle can be set freely in the range) |
|
|
Maximum working pressure of system |
31.5 MPa |
|
|
Dimension |
1250*800*1100 mm |
1250*800*1100 mm |
