- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
GW-H50 Steel bar Hydraulic Bending And Re-bending Testing Machine
Application:
This type of testing machine is designed to perform bend test on metallic materials, like rod steel, plate steel and threaded steel. It features dual-direction hydraulic loading, easy to bend specimen with diameter less than 50mm to 180° .Hand wheel drives dual-direction screw lead to adjust the support roller span. The support roller is self-lock; no need any spanner to tighten. Plug-in type mandrel is simple to change. This equipment provides speed adjustment function,and displacement and speed display function,fully complying with Clause 6.3 of ISO 7438:2005:“In case of dispute,a testing rate of(1±0,2) mm/s shall be used". It can also real-time display bending angle and facilitate for various angle tests.
Specifications:
|
Model |
HST-GW-H50M |
HST-GW-H/50A |
|
Bending Diam Of Steel Bar(mm) |
Ф6-Ф50 |
|
|
Max pushing force(KN) |
500 |
|
|
Cylinder max travel(mm) |
400 |
|
|
Forward Bending Angle |
0°～180° (the angle can be set freely in the range)l |
|
|
Reverse Bending Angle |
0°～90° (the angle can be set freely in the range) |
|
|
Maximum working pressure of system
|
25 MPa |
|
|
Round specimen diameter(mm) |
Φ6~Φ50 |
|
|
Flat specimen thickness(mm) |
(6~40)x50 |
|
|
Mandrel diameter(mm) |
Φ18~450 (can be customized) |
|
|
Distance between the rollers(mm) |
500 |
650 |
|
Span rollers adjustment mode |
Manual adjustment |
Electric adjustment |
|
Motor Power (kw ) |
1.5 |
3 |
|
Voltage |
380V/50HZ/3 phase |
|
