- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
Wheel Radial Load Fatigue Testing Machines
Wheel Radial Load Fatigue Testing Machines
Wheel Radial Load Fatigue Testing Machine is a device with a rotating drum, which has a smooth surface and is wider than the contact area of the loading test tire. When the wheel is rotating, the test function applies a constant radial load to the wheel.
Standard:
QC/T211-1996 Test method for light alloy wheels for motorcycles and mopeds;
QC/T212-1996 General Technical Conditions for All Wheels of Motorcycle and Moped Aluminum;
JASO T 203-85 Motorcycle Light Alloy Wheels;
ISO 8644-1988 Motorcycle-Light Alloy Wheels - Test Methods;
ISO 8645-1988 Moped - Light Alloy Wheels - Test Method;
GB/T6147-92 "Test machine packaging, packaging marks, storage and transportation technical requirements"
Technical Specification:
|
MODEL |
HST-PWR10 |
|
Load cell |
10KN, display accuracy±1% (from 20% ~100%) |
|
Actuator loading capacity |
20KN |
|
Tire inflation pressure |
200Kpa |
|
drum surface line speed |
2.5~140km/h |
|
Q value |
10KN*2.25=22500N |
|
Rotate drum diameter |
1707.6mm±0.25 |
|
Drum surface width |
400mm |
|
Turns number, and test mileage |
106 |
|
measuring the hub range (After installing the tire) |
800mm |
|
Dimensions: |
4000*1900*2200mm (L*W*H), 4800kg |
|
total motor power (for Car tire) |
25Kw |
|
Accessories |
Wind cooling system, completing protective shield |
