- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Impact Testing Machine Series
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
-
Universal Testing Machine
HST JBDS-300Y/500Y Digital Display Low-temperature Automatic Charpy Impact Testing Machine(-60°c/80°c)
HST JBDS-300Y/500Y Digital Display Low-temperature Automatic Charpy Impact Test
Introduction:
JBDS impact testing machine used to determine the metal material under dynamic load resistance to impact performance, in order to determine the material under dynamic load properties. The use of pendulum impact before the potential energy and the impact of the remaining potential energy difference in the dial displayed on the way to get the sample absorbed power.
Standards
ASTM A370, BS EN ISO 148-1; EN10045, ASTM E23, GB/T3808-2002 ,GB/T229-2007.
Specifications
|
MODEL |
HST JBDW-300Y-60 HST JBDW-300Y-80 |
HST JBDW-500Y-60 HST JBDW-500Y-80 |
|
Impact energy (J) |
150,300 |
250,500 |
|
Value of every grid (J) |
0~300(2J), 0~150(1J) |
0~500(5J), 0~250(2.5J) |
|
Moment of pendulum(N·m) |
0~300J(160.7695N·m), 0~150J(80.3848N·m) |
0~500J(267.9492N.m), 0~250J(133.9746) |
|
Impact velocity (m/s) |
5.24 |
5.4 |
|
Distance between pendulum center and sample center (mm) |
750 |
800 |
|
Raised angle |
150º |
|
|
Standard span (mm) |
40+0.2 |
|
|
Round angle of jaws (mm) |
R1-1.5((1mm is special order) |
|
|
Round angle of striking edge (mm) |
R2-2.5 or R8±0.05(8mm is special order) |
|
|
Specimen holder support surface angle |
11° |
|
|
The impact of the blade angle |
30° |
|
|
The impact blade thickness (mm) |
16 |
|
|
Size of specimen (mm) |
55x10x10 , 55x10x7.5 , 55x10x5 |
|
|
Cooling way |
Compressor refrigeration |
|
|
Capacity of sample box |
20 |
|
|
Range of low temperature |
-60°c/80°c |
|
|
Speed of sending specimen |
≤2S |
|
|
Power supply |
3phs, 380V/220V±10%, 50Hz or specified |
|
|
Dimensions (mm) |
2124 x 600 x 1340 |
2144 x 736 x 1390 |
|
Gross weight(KG) |
550 |
750 |
