- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
JBDW-D Computer Control Low-temperature Charpy Impact Testing Machine(0°C ~ -190°C)
JBDW-D Computer Control Ultralow-temperature Automatic Charpy Impact Testing Machine is used for measuring the metal material resistance performance under dynamic load, in order to determine the material properties under dynamic load.
It’s a necessary testing machine, not only used in the metallurgy, machine manufacture etc areas, but also used for the science research.
2.Standards:
ASTM E23, ISO148-2006 and GB/T3038-2002, GB/229-2007.
3.Technical Specifications:
| Model | JBDW-300D | JBDW-500D |
| Impact Energy | 150 J / 300 J | 250 J / 500 J |
| Value Of Every Grid | 1 J | |
| Control Methods | Computer Full Automatic Control | |
|
The Distance Between The Pendulum Shaft And Impact Point |
750 mm | 800 mm |
| Impact Speed | 5.2 m/s | 5.4 m/s |
| Impact Pendulum Configuration |
150 J, 1 PC; 300 J, 1 PC |
250 J, 1 PC; 500 J, 1 PC |
| Pre-rising Angle Of The Pendulum | 150° | |
| Specimen Bearer Span | 40+0.2 mm | |
| Round Angle Of The Jaw | R 1.0~1.5 mm | |
| Round Angle Of Impact Edge | R 2.0~2.5 mm (Special Order: R8±0.05 mm) | |
| Angle Accuracy | ±0.1° | |
| Standard Specimen Dimension | 10 mm*10(7.5 or 5) mm*55 mm | |
| Thickness Of Impact Knife | 16 mm | |
| Cooling Way | Liquid Nitrogen Refrigeration | |
| Capacity Of Sample Box | 6 PCS | |
| Range Of Low Temperature | 0°C ~ -190°C | |
| Precision Of Controlling Temperature | Fluctuation ±3°C Grades 2°C | |
| Power Supply | 3phs, 380V, 50Hz | |
