- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Impact Testing Machine Series
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
-
Universal Testing Machine
JBS-C 300j,450j,750j Touch screen Digital Display Charpy Impact Testing Machine
JBS-C 300j,450j,750j Touch screen Digital Display Charpy Impact Testing Machine
1.Application:
JBS-C Touch screen Digital Display Semi-automatic Charpy Impact Testing Machine is used for measuring the metal material resistance performance under dynamic load, in order to determine the material properties under dynamic load.
It’s a necessary testing machine, not only used in the metallurgy, machine manufacture etc areas, but also used for the science research.
2. Standards
ISO148, EN10045, ASTM E23, GB/T3808-2002 ,GB/T229-2007.
3.Technical Specifications:
|
Model |
HST JBS-300C |
HST JBS-450C |
HST JBS-600C |
HST JBS-750C |
|
Control Method |
Single Chip Control |
|||
|
Max. Impact Energy |
300 J |
450 J |
600 J |
750 J |
|
Impact Speed |
5.24 m/s |
|||
|
Pre-rising Angle Of The Pendulum |
150° |
|||
|
Angle Accuracy |
±0.1° |
|||
|
Specimen Bearer Span |
40 mm |
|||
|
Round Angle Of The Jaw |
R 1.0~1.5 mm |
|||
|
Round Angle Of Impact Edge |
R 2.0~2.5 mm (Special Order: R8±0.05 mm) |
|||
|
Thickness Of Impact Knife |
16 mm |
|||
