- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HST-UL94 Horizontal Flammability Tester and Vertical Burning Tester
Equipment description:
This Horizontal and vertical flammability tester is applicable to solid materials and the apparent density measured according to GB6343 not less than 250kg/m2 of foam when placed in the horizontal and vertical with a small flame ignition source ignited combustion after the test. The machine has the use of safe, reliable, easy to operate, and so on.Meet the standard:
This Horizontal and vertical flammability testr according to national standards GB/T2408-1996 "Test method for flammability of plastic - horizontal and vertical Law," flame-retardant material designed to test equipment.
Meet UL 94 and EN 60695-2-11, IEC 60950
Specification:
|
Model |
HST- UL94 |
|
Control mode |
Keystroke control |
|
Outer box dimensions |
110*650*125(cm) |
|
Box volume |
≥0.5m³，With glass observation door |
|
Flame time |
0-99 minutes and 99 seconds can be set, accuracy ±0.1 second |
|
Residual flame time |
0-99 minutes and 99 seconds can be set, accuracy ±0.1 second |
|
The rest of the burining time |
0-99 minutes and 99 seconds can be set, accuracy ±0.1 second |
|
Test gas |
More than 98% methane/37MJ/m³ natural gas (coal gas is also available) |
|
Burner size parameters |
Adopt imported lamp, the inner diameter of spray can is 9.5±0.3mm, and the effective length of spray tube is 100±10mm |
|
Flame height |
It can be adjusted from 20mm to 175mm as required by standard |
|
Flowmeter |
105ml/min |
|
Gas leak detection |
Gas alarm device (optional) |
|
Power |
AC220V, 50Hz |
Recommended products
