HST WDW Series 50/60 Tons 500KN/600KN Computer Control Electronic Universal Testing Machine with Horizontal hydraulic grips2023-12-01

Our WDW Series Computer control universal testing machine is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, researchREAD MORE >>

HSTWDW-TH Series Computer Control High Temperature(1400 ° C )Electromechanical Universal Testing Machines2023-11-22

WDW series electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensREAD MORE >>

ASTM A1061 | Metals | Multi-Wire Strand Testing2023-11-17

ASTM A1061 is a testing standard that describes the mechanical testing procedure for testing multi-wire steel strand. Strands are made out of two or more steel wires wound together in a helical form. The mechanical properties of the strand are determined by a test in which fracture of the specimen oREAD MORE >>

ASTM D638 Tensile Testing of Plastics2023-11-10

ASTM D638 Tensile Testing of PlasticsTensile testing plastics is the process of stretching or pulling an object with a constantly changing force. ASTM D638 covers the tensile properties of both reinforced and unreinforced plastics in the form of dumbbell-shaped molded plastic test specimens.These arREAD MORE >>

Testing&Control(24–26 October 2023) successfully concluded2023-11-03

From 24–26 October 2023, the Testing&Control 2023 was held in Moscow,Russia. Our company was invited to participate as a material testing equipment supplier. At this exhibition, HST focused on displaying solutions such as microcomputer-controlled electronic testing machines and hardness testerREAD MORE >>

ASTM C39 Compressive Strength testing machine of Cylindrical Concrete Specimens2023-10-27

ASTM C39 test for compressive concrete covers the determination of compressive strength of cylindrical concrete specimens such as molded cylinders and drilled cores. ASTM C39 consists of applying a compressive axial load to molded cylinders or cores at a rate which is within a prescribed range untilREAD MORE >>

ASTM D3330 Peel Adhesion Pressure Sensitive Adhesive Tapes testing machine2023-10-18

ASTM D3330 is one of the more popular testing standards to determine the adhesive strength of pressure sensitive tapes. This unique standard consists of Methods A through F, identifying ways to measure peel adhesion with 180 degree and 90 degree peel methods. Our test engineers are experienced with READ MORE >>

Tensile Testing Composite Laminate Specimens to ASTM D30392023-10-13

ASTM D3039 tensile testing is used to measure the force required to break a polymer composite specimen and the extent to which the specimen stretches or elongates to that breaking point. Tensile tests produce a stress-strain diagram, which is used to determine tensile modulus. The data is often usedREAD MORE >>