- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HST-WDW-KZ10 Computer Control Ceramic tile bending test machine
1. Application It is used to test the bending resistance and bending resistance of various ceramic tiles, asbestos cement wave, asbestos cement slab, straw board, gypsum board, lightweight insulation material board, wood board, and various non-metal composite boards and research.
2. Standards
GB / T3810. 1-2016 Test Methods for Ceramic Tiles Part 1: Sampling and acceptance conditions;
GB / T3810.4-2016 Test method for ceramic tiles Part 4: Determination of modulus of rupture and breaking strength;
GB / T9966.2-Test methods for natural facing stones GB / T4100-2015 ceramic tiles GB 26539-2011 anti-static ceramic tiles; GB / T9775- paper gypsum board; JCT997-Decorative paper gypsum board; GB / T26204-Paperboard with gypsum board cover; GB / T12914-Determination of tensile strength of paper and paperboard; GB / T17669.3-Determination of mechanical properties of architectural gypsum; GB / T9776-Building plaster; DIN 53291-Sandwich structure test. Pressure test perpendicular to surface layer; DIN 53292-Sandwich structure inspection. Tensile test perpendicular to the surface; DIN 53293-Sandwich structure inspection. Bending test; DIN 53294-Interlayer structure inspection. Shear test; ASTM C1658 / C1658M-2013 standard specification of glass fiber gypsum board;EN ISO 10545-4
3.Specifications:
|
Model |
HST-WDW-KZ10 |
|
|
Load cell |
||
|
Capacity |
N |
10000 |
|
Calibration standard |
- |
0.5 according to ISO 7500- 1 - Meets ASTM E-4 |
|
Accuracy grade |
% |
0.5 of reading |
|
Testing load accuracy |
% |
|
|
Deformation accuracy |
% |
|
|
Displacement accuracy |
% |
|
|
Position resolution |
μm |
0.025 |
|
Force range |
FS |
0.2%- 100% |
|
Force resolution |
FS |
Capacity/500, 000 |
|
Force accuracy |
% |
0.5 of reading |
|
Controller |
||
|
Sampling frequency |
H |
Up to 1000 |
|
Closed loop control frequency |
Hz |
Up to 1000 |
|
Software |
|
Support English, Russian, etc |
|
Load resolution |
KN |
Capacity/500, 000 |
|
Speed |
||
|
Testing Speed |
mm/min |
0.001-500 |
|
Speed accuracy |
% |
±0.5 of set speed |
|
Main frame |
||
|
Frame type |
- |
Floor type double column/dual test space |
|
Test width |
mm |
1200 (According to the customer request ) |
|
Accommodate tile |
mm |
1200*1200mm tiles size |
|
Crosshead Travel |
mm |
1 100 |
|
Max. Tensile Testing Space |
mm |
700 |
|
Max. Compression Testing Space |
mm |
1 100 |
|
Power supply |
V/Hz |
230V-50/60 |
|
Note:Extra wide and/or extra height frames are available. Power supply system is completely customizable. Tensile space, test width, and speed is completely customizable. |
||
