- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
HST XJU ISO180 ASTM D256 Digital Display Izod Pendulum Impact Testing Machine
Application:
This Impact Test is mainly used to measure the impact toughness of rigid plastic, reinforced nylon, fiberglass, ceramics, cast stone, insulation materials and other non-metallic materials. It is the ideal testing equipment in the chemical industry, scientific research institutes, universities and quality testing departments.
Standard:
ISO180, ASTM D256 and the equivalent.
|
Model |
HSTXJUD-5.5T |
|
|
Standard |
ISO180,ASTM D256 |
|
|
Display |
Touch screen |
|
|
Impact velocity |
3.5m/s |
|
|
Impact energy |
2.75J, 5.5J |
11J, 22J |
|
Precision |
Angle (0.01 °) Energy (0.01J) |
|
|
Impact center distance |
335mm |
|
|
Pendulum angle |
150° |
|
|
Distance between striking edge and top surface of jaw |
22.0mm±0.2mm |
|
|
Corner radius of striking edge |
R=0.8mm±0.2mm |
|
|
Print out |
Capacity. Angle, energy, etc. |
|
|
Power supply |
AC220V, 50Hz |
|
