- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
XJU Series 2.75~22J Dial display Plastic Izod Impact Testing Machine
1. Product introduction:
It is mainly used to measure the impact toughness of non-metallic materials such as hard plastics, reinforced nylon, glass fiber reinforced plastics, ceramics, cast stone, and electrical insulating materials. Ideal testing equipment for chemical industry, scientific research units, colleges and universities, quality inspection departments, professional manufacturer laboratories and other units.
2. Executive standard:
● ISO179-2000 "Plastic-Hard Material-Determination of Impact Strength of Simply Supported Beams"● GB/T1043-2008 "Impact test method of rigid plastic simply supported beam"
● JB/T8762-1998 "Plastic Simply Supported Beam Impact Testing Machine"
● GB/T18743-2002 "Thermoplastic pipe simply supported beam impact test method for fluid transportation" (applicable to pipe fittings)
3. Technical specifications:
|
Model |
XJU-22 |
XJU-5.5 |
|
Impact energy |
11J、22J |
2.75J、5.5J |
|
Impact velocity |
3.5m/s |
|
|
Pendulum advance angle |
1500 |
|
|
Distance from impact blade to above jaw |
22mm±0.2mm |
|
|
Strike center distance |
335mm |
|
|
Blade radius |
R=0.8mm±0.2mm |
|
|
Energy loss |
11J <0.05J；22J <0.10J； |
1.0J <0.02J；2.75J <0.03J；5.5J <0.03J |
|
Minimum resolution |
0.001J |
|
|
Instrument size |
L*W*H:700mm×350mm×850mm |
|
|
Required space |
Fore and aft distance：0.4m, Left and right distance：1.5m,Upper distance：1.5m |
|
|
power supply |
100VA 220VAC 50HZ |
|
