- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HST-NW 50N.m-2000N.m Universal Joint Torsion Fatigue Testing System
1. Used in torsional fatigue test and anti-fatigue characteristics of structure for drive shaft, universal joint or intermediate shaft.
2. Used in static torsion strength test for drive shaft, universal joint or intermediate shaft.
3. Used in quasi-static torsion strength test for drive shaft, universal joint or intermediate shaft.
4. Used in universal joint intermediate shaft test, constant speed drive shaft test, fixed joint test, moving joint test.
5. Used in bearing capacity test for drive shaft, universal joint or intermediate shaft.
6. Used in shift and angle test for universal joint.
7. Used in axial clearance test and peripheral clearance test for universal joint.
8. Used in swinging torque test, rotating torque test for universal joint.
9. Used in life test for universal joint and drive shaft and universal joint durability test.
2.Standards
QC/T1020-2015 test method for automobile constant speed universal joint and its assembly;
QC/T647-2013 automotive steering knuckle assembly performance requirements and test methods;
QC/T649-2013 automotive steering mechanism performance requirements and test methods;
JB/T8925-2017 rolling bearing automobile universal joint cross shaft assembly technical conditions;
JB/T10189-rolling bearing constant speed universal joint and its assembly for automobile;
Agricultural universal joint drive shaft JB/ t11909-2014
GB/T15089- classification of motor vehicles and trailers
3.Technical Parameter:
| Model | HST-N50W | HST-N100W | HST-N200W | HST-N500W | HST-N1000W | HST-N2000W |
| Max. Torque (N/m) | 50 | 100 | 200 | 500 | 1000 | 2000 |
| Machine Level | 1 Class | |||||
|
Torsion Angle Measurement Range |
2%-100%FS | |||||
| Control Method |
Constant Torque And Constant Speed Rotation, Constant Speed Twist Angle Of The Closed Loop Control Mode |
|||||
|
Torque Display Resolution |
1/20000 | |||||
|
The Accuracy Of Torque Values |
≤±1% | |||||
|
The Accuracy Of Torsion Angle Value |
Better Than±0.5% | |||||
|
Torsion Angle Display Resolution |
1/20000 | |||||
|
The Accuracy Of Angle Values |
≤±1% | |||||
|
Angle Display Resolution |
0.01° | |||||
|
Torsional Angular Rate Control Range |
0.05-800°/min | |||||
|
Max. Reading Of Torsion Angel |
99999° | |||||
|
Max. Distance Between Two Collets |
600mm | |||||
| Supply Power | 220V±10%, 50Hz | |||||
