Features:

1. Uses an imported motor, resulting in low noise and precise control;
2. Large LCD screen with Chinese menu. During testing, it displays tensile time, load tension, etc. in real time;

3. Thermal printer: low noise and clearer readings;
4. Direct measurement results: After completing a set of tests, the measurement results can be easily displayed directly, and statistical reports, including average value, standard deviation, and coefficient of variation, can be printed.
5. Variable specimen size and tensile speed: For commonly used standard-sized specimens, tensile tests can be performed directly at a specified speed. Appropriate tensile speeds can also be set as needed to change the test length and width of the specimen.
6. High- speed single-chip microcomputer and high-speed sampling module ensure real-time measurement data (maximum force values are not lost);
7. Data communication: The instrument is equipped with a standard serial RS232 interface, which can provide data communication for a host computer integrated reporting system.

 Technical Specifications:                              

ØForce discrimination: 1/100000

Dataanalysis sampling: Sampling frequency 400 times/second

Forceaccuracy: ±0.1% of the indicated value (20 -- 100% FS)

Accuracy: ≤ ±0.5%

Deformationresolution: ≤0.1mm

ØSample clamping method: Pneumatic automatic clamping

Clampingpressure: 0.2 -- 0.7 MPa (adjustable)

ØSample size range: 1 -- 25 mm

Testforce range: 0.4% ~ 100%FS

ØElongation measurement range: 45 -- 260 mm

ØTest speed accuracy: (1 -- 10 0 ) mm/min: ±0.1 mm/min

ØClamp spacing positioning error ±0.2mm

ØMoving chuck reset error ±0.1mm

ØClamp spacing: The test length can be arbitrarily selected within the range of (1~250) mm.

ØTensioning speed: (1~500) mm/min stepless speed regulation.

ØReturn speed: 100mm/min

ØMeasurement range: (3~30) N (for household paper), (6~500) N for cultural paper, packaging paper, specialty paper, paper-based composite materials, etc.

ØSensor system protection: Rapid sensor protection device 

ØWet tensile testing configuration: Wet tensile strength testing tank (optional)

ØTransmission screw: Adopts a Taiwan single-column precision ball screw

Human-Machine Interface: 7.0-inch touchscreen operating platform with detection status displayed as a graph.

Softwareprogram: Can be connected to a computer for computer-controlled testing, and print reports for computer output(optional).

Printoutput: Modular all-in-one thermal printer.

Externaldimensions: 650*500*400mm

Weight:40kg