- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
Face Mask Particulate Filtration Efficiency Testing Equipment
Automatic Filter (Mask) Tester (Medical) is used to test the filter efficiency and differential pressure of fold mask, medical face mask and cup mask.
For filter efficiency test, this machine can do single-machine for dual-aerosol (both oily and salty particles). Customers can choose double generator or single generator according to their own needs. Additional clean air source system is required if you choose the double-generator.
Standards:
YY0469-2011 5.6.2 Particulate Protection Standard
Application:
Product use: masks, disposable masks, non-woven masks, medical protective masks
Technical Specification：
l Air source system:
Exhaust volume: 10 ± 100L / M
Solid aerosol particle size: 0.075 ± 0.02um
Concentration: ≤200mg / m3
l Product model: SUP_GLXT
l Basic principle: Use an aerosol generator to generate a certain concentration of gas, and then use a photometer to measure the gas concentration to detect the particle size before and after breathing
l NaCl concentration: 200mg / m3
l Flow accuracy: 10-100L / min, accuracy 2%
l Test medium: NaCl
l Pressure: 500pa
l Number of samples: 1 way
l Structure composition: particle generator, flow detection device, concentration detection device.
