- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
Servo linear actuator
HNC series servo linear actuators are the latest generation of servo linear actuators introduced by our group. Three-dimensional gap-free joint supports are installed at both ends to eliminate the damage of the actuator from the lateral force from the sample to the maximum. The seat adopts unitized, standardized and modular design, and can be flanged after being removed. It has the characteristics of high response, low damping and long life. The starting pressure is less than 0.05Mpa.
Main technical specifications of servo linear actuator NCA series:
| MODEL | NCA10 | NCA15 | NCA25 | NCA50 | NCA100 | NCA150 | NCA250 | NCA500 |
NCA 1000 |
NCA 2000 |
| Maximum dynamic test force（KN） | ±10 | ±15 | ±25 | ±50 | ±100 | ±150 | ±250 | ±500 | ±1000 | ±2000 |
|
Frequency （Hz） |
＞300 | ＞300 | ＞300 | ＞250 | ＞200 | ＞200 | ＞150 | ＞50 | ＞25 | ＞15 |
|
Amplitude （mm） |
±75 | ±75 | ±75 | ±75 | ±75 | ±75 | ±75 | ±75 | ±75 | ±75 |
