- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
HST-TP shock absorber dynameter fatigue tester
Introduction:
The HST-TP microcomputer-controlled shock absorber dynamometer is mainly used for performing dynamometer tests and fatigue life tests on drum shock absorbers used in motor vehicles such as automobiles, motorcycles, and armored vehicles. The whole machine has a reasonable structure, simple and reliable, test space adjustment, test stroke adjustment is accurate and convenient; test piece clamping is convenient and reliable; the whole machine runs smoothly and is easy to maintain and maintain.Main parameters:
|
Test force |
100N-500KN |
|
Test frequency |
0.1-30Hz/50Hz |
|
Test amplitude |
±50mm (can be customized) |
|
Test force accuracy |
0.01~0.05 |
|
Counter capacity |
9*10^9 |
|
Counting stop accuracy |
±1 |
|
Maximum outer diameter of the test piece |
Φ150mm (fixtures can be designed) |
|
Maximum length of test piece |
600mm |
|
Power supply voltage |
380VAC 50Hz(three-wire four-phase system) |
|
Test beat |
10~30 seconds/2 pieces |
