- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
HST-HDTV3003T HDT Vicat Softening Temperature Tester
Application:
Plastics HDT Vicat Softening Temperature Test Point Tester is used to determine the heat distortion temperature (HDT) and Vicat softening point of plastic materials. It is widely suitable for plastic, hard rubber, nylon, electrical insulating materials, long fiber reinforced composite materials, high strength thermosetting lamination materials and other non-metallic materials.
Standard:
GB / T1633 "Determination of Vicat Softening Temperature (VST) of Thermoplastics"
GB / T1634 "Determination of Plastic Load Deformation Temperature Part 1: General Test Method"
GB / T8802 "Determination of softening temperature of plastic pipe fittings"
IS075-2013 "Determination of Plastic Load Deformation Temperature"
ASTM D 648 "Test Method for Thermal Deformation Temperature of Plastics"
ASTM D 1525 "Test Method for Vicat Softening Temperature of Plastics"
Specification
|
Model |
HST-HDTV3003ST |
|
Structure |
Table type |
|
Display |
7 inch Touch Screen |
|
Sample Frame |
Manual |
|
Temperature range |
RT~300℃ |
|
Heating speed |
120℃/h [(12±1)℃/6min],50℃/h [(5±0.5)℃/6min] |
|
Max. temperature error |
±0.5℃ |
|
Maximum deformation measurement range |
1mm (Vicat test); 0.33 mm (thermal deformation) |
|
Heating medium |
methyl silicone oil (below 200 centistokes) |
|
Maximum heating power |
3kw |
|
Working position |
3 (4 or 6 optional) |
|
Cooling method |
natural cooling |
|
Three methods of load deformation temperature |
Method A: 1.80MPa bending stress, Method B: 0.45MPa bending stress, Method C:8.00MPa bending stress |
|
Mass of load bar and pallet |
68g+1g |
|
Power supply |
AC220V, 10A, 50Hz |
Recommended products
