- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
-
Horizontal Tensile Testing Machine
- Steel Wire Testing Machine
- Dynamic Fatigue Testing System
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Erichsen Cupping Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Intellectual_Product
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Bolt testing equipment
- Friction and wear testing machine
- Voltage Breakdown Tester
- Torque rheometer
- Capillary rheometer
- Plastic Friction and Wear Testing Machine
- Testing machine accessories
HEZ-10 10mm Metal Wire Torsion Testing Machine
HEZ-10 10mm Metal Wire Torsion Testing Machine
Application:
HEZ Series Metal Wire Torsion Tester is mainly used to test the plasticity of metal wires and ropes undertorsion condition. Surface flaws of steel wires may be shown during the testing process. It is most suitable forquality inspection of departments related to steel wire. The revolution is displayed on a 4-digit LED. Max.displayed revolution is 999.9. The revolution value is automatically held at the break of specimens. Itconforms to standards of ASTM A938, ISO7800.
Specifications:
| Model | HEZ-1 | HEZ-3 | HEZ-6 | HEZ-10 |
| Work Method | Auto-loading | |||
| Max. Clamp metal wire diameter（mm） | Ф0.1-Ф1.0 | 1-3 | Ф1-Ф6 | Ф3-Ф10 |
| Parallelism of the full moving guide | ≤0.2 | |||
| Distance between the grips (mm) | 200 | 320 | 500 | 500 |
| Rotation speed adjusting range (r/min） |
15-120 |
15-120 |
15-120 | 15-120 |
| Torsion speed error (%) | ＜±10% | |||
| Min. number of circle values | 0.1 | |||
| Two chuck alignment（mm) | ＜Ф0.4 | |||
| Jaw hardness（HRC) | 50-65 | |||
| Weights error (%) | ±0.5 | |||
| Work Noise （dB) | ≤70 | |||
| Min. revolutions reading value（r） | 1 | |||
| Power Supply | AC 220V±10%,50Hz | |||
