- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HPT Series Pipe hydrostatic burst testing machine
1. Application:
HSTHPT-225 Pipe hydrostatic burst testing machine is mainly used to determine the resistance of thermoplastics pipes and short-time hydraulic burst to constant internal water pressure at constant temperature. It is applicable to thermoplastic pipes intended for the conveyance of fluids. It confirms to ISO1167,ASTM D1598 and ASTM D1599.
2. Testing Standard:
ISO 1167, ASTM D1598, ISO9080, CJ/T108 and ASTM F1335.
3. Main Technical Parameters:
|
Model |
HPT-10 |
HPT-16 |
HPT-25 |
|
Max pressure |
10MPa (100Bar) |
16MPa (160Bar) |
25MPa (250Bar) |
|
Resolution of pressure testing |
0.001MPa, 0.01Bar |
||
|
Accuracy of pressure control |
-1% ~ +2% |
||
|
Test station |
3 stations (standard supply) or more stations can be customized |
||
|
Testing pipe diameter |
Φ16-Φ2000mm |
||
|
Control range of water temperature |
Room temperature to 95°C or 15°C to 95°C |
||
|
Time range |
0 - 10000h |
||
|
End caps material |
carbon steel / stainless steel |
||
