- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HST-W600K4L Vertical Four-Station Thermo-Mechanical Tensile Testing Machine
Introduction:
Our company adopts an oil cylinder straight-pull structure: equipped with a special omposite mandrel calibration tool (rated tensile strength 550kN), which is light in weight and easy to hang. The vertical type does not require climbing, and the horizontal type heat engine can complete the calibration work without a huge workload.
Parameters:
|
Model |
HST-W600K4L |
|
Load number of workstations |
4 (number of stations can be customized such as single station, double station, three station, or four station) |
|
Tensile test force of single cylinder |
600kN |
|
Force range and accuracy of each set of loading device |
3-600kN, accuracy better than 0.5% |
|
loading speed |
No-load 0-120mm/min steplessly adjustable, automatic test control |
|
Environmental chamber test space (length*width*height) |
1700mm*800mm*3000mm |
|
Displacement (deformation) range and measurement accuracy |
300mm, accuracy better than ±0.01mm |
|
Control mode |
Constant test force fully automatic control |
|
Test force holding point and holding time |
Meet the pressure holding requirements of more than 200 hours |
