- Electronic Universal Testing Machine
- Hydraulic Universal Testing Machine
- Dynamic Fatigue Testing System
-
Horizontal Tensile Testing Machine
-
Robot Automated Testing Systems
- Impact Testing Machine Series
- Compression Testing machine
- Torsion Testing Machine
- Bending Testing Machine
-
Creep and Rupture Testing Machine
-
Elastomeric Bearing Testing Machine
- Spring Testing Machine
-
Insulator Testing Machine
- Metallographic
- Hardness Tester
- Microscope
-
Plastic Pipes and Rubber Test Machine
- Melt Flow Index Tester
- HDT&VICAT Softening Point Temperature Tester
- Pendulum Impact Tester
- Hydrostatic Pressure Tester
- Plastic Pipes Ring Stiffness Tester
- Differential Scanning Calorimeter
- Moisture Meter
- Density Tester
- Ash Content Tester
- Falling Mass Impact Testing Machine
- Methylene Chloride Soak Tester
- Flame Resistance Tester
- Milling Machines
- Rubber industry testing equipment
- Environmetal Test Chamber
- Optical Spectrometer
-
Other testing equipment
- Testing equipment for masks and protective Cover
- High And Low Temperature Test Chamber
- NDT Equipment Series
- Vision Measuring Machine
- Optical Profile Projector
- Coordinate Measuring Machine
- Paper and Package Test Tester
- Textile Test tester
- Optical Test Machine
- Cupping Testing Machine
- Bolt testing equipment
- Friction and wear testing machine
- Testing machine accessories
HST-HWN Computer Controlled Electronic Bending and Torsion Testing Machine
Introduction:
Our HST-HWN series electronic bending and torsion testing machines are suitable for bending and torsion testing of pillar insulators. They can be used for pillar insulators, composite insulators, pin insulators, rod insulators, rod composite insulators, glass insulators, lightning arresters, and sheaths. Bending and torsion testing of insulators, porcelain core rods, composite core rods, bushings, hollow insulators, wall bushings, etc. Meet the bending test, torsion test, deflection test under load and mechanical test one by one for pillar porcelain insulators of 1000kV and below.
The processing of all parts of the company's products is controlled by the ISO9001 quality management system. Key outsourced components are all imported, which effectively improves the accuracy and long-term stability of the equipment.
Parameters:
1. Maximum specimen height: 1500mm
2. Accuracy level: Level 1
3. Maximum bending load: 50kN
4. Effective measurement range of bending test force (kN): 0.5%～100%F·S (0.5kN～50kN)
5. Load resistance measurement accuracy: within ±0.5% of the indication value
6. Bending stroke: 1000mm (deformation amount)
7. Bending control method: electronic servo closed-loop control (force, displacement, deformation closed-loop arbitrary program control)
8.Maximum torque: 20kN.m
9. Effective measurement range of torsion test force (kN): 1% ~ 100%F·S
10. Torsional load measurement accuracy: within ±1% of the indication value
11. Four-point direction bending conversion method: 90° automatically completed
